sync latest changes

backups/rsnapshot.conf

@@ -0,0 +1,252 @@
+#################################################
+# rsnapshot.conf - rsnapshot configuration file #
+#################################################
+#                                               #
+# PLEASE BE AWARE OF THE FOLLOWING RULE:        #
+#                                               #
+# This file requires tabs between elements      #
+#                                               #
+#################################################
+
+#######################
+# CONFIG FILE VERSION #
+#######################
+
+config_version	1.2
+
+###########################
+# SNAPSHOT ROOT DIRECTORY #
+###########################
+
+# All snapshots will be stored under this root directory.
+#
+
+snapshot_root	/run/media/thomas/archbish_snaps
+# If no_create_root is enabled, rsnapshot will not automatically create the
+# snapshot_root directory. This is particularly useful if you are backing
+# up to removable media, such as a FireWire or USB drive.
+#
+#no_create_root	1
+
+#################################
+# EXTERNAL PROGRAM DEPENDENCIES #
+#################################
+
+# LINUX USERS:   Be sure to uncomment "cmd_cp". This gives you extra features.
+# EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility.
+#
+# See the README file or the man page for more details.
+#
+cmd_cp		/usr/bin/cp
+
+# uncomment this to use the rm program instead of the built-in perl routine.
+#
+cmd_rm		/usr/bin/rm
+
+# rsync must be enabled for anything to work. This is the only command that
+# must be enabled.
+#
+cmd_rsync	/usr/bin/rsync
+
+# Uncomment this to enable remote ssh backups over rsync.
+#
+#cmd_ssh	/usr/bin/ssh
+
+# Comment this out to disable syslog support.
+#
+cmd_logger	/usr/bin/logger
+
+# Uncomment this to specify the path to "du" for disk usage checks.
+# If you have an older version of "du", you may also want to check the
+# "du_args" parameter below.
+#
+cmd_du		/usr/bin/du
+
+# Uncomment this to specify the path to rsnapshot-diff.
+#
+cmd_rsnapshot_diff	/usr/bin/rsnapshot-diff
+
+# Specify the path to a script (and any optional arguments) to run right
+# before rsnapshot syncs files
+#
+#cmd_preexec	/path/to/preexec/script
+
+# Specify the path to a script (and any optional arguments) to run right
+# after rsnapshot syncs files
+#
+#cmd_postexec	/path/to/postexec/script
+
+# Paths to lvcreate, lvremove, mount and umount commands, for use with
+# Linux LVMs.
+#
+#linux_lvm_cmd_lvcreate	/path/to/lvcreate
+#linux_lvm_cmd_lvremove	/path/to/lvremove
+#linux_lvm_cmd_mount	/usr/bin/mount
+#linux_lvm_cmd_umount	/usr/bin/umount
+
+#########################################
+#     BACKUP LEVELS / INTERVALS         #
+# Must be unique and in ascending order #
+# e.g. alpha, beta, gamma, etc.         #
+#########################################
+
+
+retain	hourly	24
+retain	daily	7
+retain	weekly	4
+retain	monthly	12
+
+
+############################################
+#              GLOBAL OPTIONS              #
+# All are optional, with sensible defaults #
+############################################
+
+# Verbose level, 1 through 5.
+# 1     Quiet           Print fatal errors only
+# 2     Default         Print errors and warnings only
+# 3     Verbose         Show equivalent shell commands being executed
+# 4     Extra Verbose   Show extra verbose information
+# 5     Debug mode      Everything
+#
+verbose		2
+
+# Same as "verbose" above, but controls the amount of data sent to the
+# logfile, if one is being used. The default is 3.
+#
+loglevel	3
+
+# If you enable this, data will be written to the file you specify. The
+# amount of data written is controlled by the "loglevel" parameter.
+#
+#logfile	/var/log/rsnapshot
+
+# If enabled, rsnapshot will write a lockfile to prevent two instances
+# from running simultaneously (and messing up the snapshot_root).
+# If you enable this, make sure the lockfile directory is not world
+# writable. Otherwise anyone can prevent the program from running.
+#
+lockfile	/var/run/rsnapshot.pid
+
+# By default, rsnapshot check lockfile, check if PID is running
+# and if not, consider lockfile as stale, then start
+# Enabling this stop rsnapshot if PID in lockfile is not running
+#
+#stop_on_stale_lockfile		0
+
+# Default rsync args. All rsync commands have at least these options set.
+#
+#rsync_short_args	-a
+#rsync_long_args	--delete --numeric-ids --relative --delete-excluded
+
+# ssh has no args passed by default, but you can specify some here.
+#
+#ssh_args	-p 22
+
+# Default arguments for the "du" program (for disk space reporting).
+# The GNU version of "du" is preferred. See the man page for more details.
+# If your version of "du" doesn't support the -h flag, try -k flag instead.
+#
+#du_args	-csh
+
+# If this is enabled, rsync won't span filesystem partitions within a
+# backup point. This essentially passes the -x option to rsync.
+# The default is 0 (off).
+#
+#one_fs		0
+
+# The include and exclude parameters, if enabled, simply get passed directly
+# to rsync. If you have multiple include/exclude patterns, put each one on a
+# separate line. Please look up the --include and --exclude options in the
+# rsync man page for more details on how to specify file name patterns.
+#
+#include	???
+#include	???
+#exclude	???
+#exclude	???
+
+# The include_file and exclude_file parameters, if enabled, simply get
+# passed directly to rsync. Please look up the --include-from and
+# --exclude-from options in the rsync man page for more details.
+#
+#include_file	/path/to/include/file
+#exclude_file	/path/to/exclude/file
+
+# If your version of rsync supports --link-dest, consider enabling this.
+# This is the best way to support special files (FIFOs, etc) cross-platform.
+# The default is 0 (off).
+#
+#link_dest	0
+
+# When sync_first is enabled, it changes the default behaviour of rsnapshot.
+# Normally, when rsnapshot is called with its lowest interval
+# (i.e.: "rsnapshot alpha"), it will sync files AND rotate the lowest
+# intervals. With sync_first enabled, "rsnapshot sync" handles the file sync,
+# and all interval calls simply rotate files. See the man page for more
+# details. The default is 0 (off).
+#
+#sync_first	0
+
+# If enabled, rsnapshot will move the oldest directory for each interval
+# to [interval_name].delete, then it will remove the lockfile and delete
+# that directory just before it exits. The default is 0 (off).
+#
+#use_lazy_deletes	0
+
+# Number of rsync re-tries. If you experience any network problems or
+# network card issues that tend to cause ssh to fail with errors like
+# "Corrupted MAC on input", for example, set this to a non-zero value
+# to have the rsync operation re-tried.
+#
+#rsync_numtries 0
+
+# LVM parameters. Used to backup with creating lvm snapshot before backup
+# and removing it after. This should ensure consistency of data in some special
+# cases
+#
+# LVM snapshot(s) size (lvcreate --size option).
+#
+#linux_lvm_snapshotsize	100M
+
+# Name to be used when creating the LVM logical volume snapshot(s).
+#
+#linux_lvm_snapshotname	rsnapshot
+
+# Path to the LVM Volume Groups.
+#
+#linux_lvm_vgpath	/dev
+
+# Mount point to use to temporarily mount the snapshot(s).
+#
+#linux_lvm_mountpath	/path/to/mount/lvm/snapshot/during/backup
+
+###############################
+### BACKUP POINTS / SCRIPTS ###
+###############################
+
+# LOCALHOST
+backup	/home/		home/
+
+#backup	/etc/		etc/
+#backup	/usr/local/	usr/local/
+#backup	/var/log/rsnapshot		localhost/
+#backup	/etc/passwd	localhost/
+#backup	/home/foo/My Documents/		localhost/
+#backup	/foo/bar/	localhost/	one_fs=1,rsync_short_args=-urltvpog
+#backup_script	/usr/local/bin/backup_pgsql.sh	localhost/postgres/
+# You must set linux_lvm_* parameters below before using lvm snapshots
+#backup	lvm://vg0/xen-home/	lvm-vg0/xen-home/
+
+# EXAMPLE.COM
+#backup_exec	/bin/date "+ backup of example.com started at %c"
+#backup	root@example.com:/home/	example.com/	+rsync_long_args=--bwlimit=16,exclude=core
+#backup	root@example.com:/etc/	example.com/	exclude=mtab,exclude=core
+#backup_exec	ssh root@example.com "mysqldump -A > /var/db/dump/mysql.sql"
+#backup	root@example.com:/var/db/dump/	example.com/
+#backup_exec	/bin/date "+ backup of example.com ended at %c"
+
+# CVS.SOURCEFORGE.NET
+#backup_script	/usr/local/bin/backup_rsnapshot_cvsroot.sh	rsnapshot.cvs.sourceforge.net/
+
+# RSYNC.SAMBA.ORG
+#backup	rsync://rsync.samba.org/rsyncftp/	rsync.samba.org/rsyncftp/

backups/rsnapshot.conf.default

@@ -0,0 +1,249 @@
+#################################################
+# rsnapshot.conf - rsnapshot configuration file #
+#################################################
+#                                               #
+# PLEASE BE AWARE OF THE FOLLOWING RULE:        #
+#                                               #
+# This file requires tabs between elements      #
+#                                               #
+#################################################
+
+#######################
+# CONFIG FILE VERSION #
+#######################
+
+config_version	1.2
+
+###########################
+# SNAPSHOT ROOT DIRECTORY #
+###########################
+
+# All snapshots will be stored under this root directory.
+#
+snapshot_root	/.snapshots/
+
+# If no_create_root is enabled, rsnapshot will not automatically create the
+# snapshot_root directory. This is particularly useful if you are backing
+# up to removable media, such as a FireWire or USB drive.
+#
+#no_create_root	1
+
+#################################
+# EXTERNAL PROGRAM DEPENDENCIES #
+#################################
+
+# LINUX USERS:   Be sure to uncomment "cmd_cp". This gives you extra features.
+# EVERYONE ELSE: Leave "cmd_cp" commented out for compatibility.
+#
+# See the README file or the man page for more details.
+#
+#cmd_cp		/usr/bin/cp
+
+# uncomment this to use the rm program instead of the built-in perl routine.
+#
+cmd_rm		/usr/bin/rm
+
+# rsync must be enabled for anything to work. This is the only command that
+# must be enabled.
+#
+cmd_rsync	/usr/bin/rsync
+
+# Uncomment this to enable remote ssh backups over rsync.
+#
+#cmd_ssh	/usr/bin/ssh
+
+# Comment this out to disable syslog support.
+#
+cmd_logger	/usr/bin/logger
+
+# Uncomment this to specify the path to "du" for disk usage checks.
+# If you have an older version of "du", you may also want to check the
+# "du_args" parameter below.
+#
+#cmd_du		/usr/bin/du
+
+# Uncomment this to specify the path to rsnapshot-diff.
+#
+#cmd_rsnapshot_diff	/usr/local/bin/rsnapshot-diff
+
+# Specify the path to a script (and any optional arguments) to run right
+# before rsnapshot syncs files
+#
+#cmd_preexec	/path/to/preexec/script
+
+# Specify the path to a script (and any optional arguments) to run right
+# after rsnapshot syncs files
+#
+#cmd_postexec	/path/to/postexec/script
+
+# Paths to lvcreate, lvremove, mount and umount commands, for use with
+# Linux LVMs.
+#
+#linux_lvm_cmd_lvcreate	/path/to/lvcreate
+#linux_lvm_cmd_lvremove	/path/to/lvremove
+#linux_lvm_cmd_mount	/usr/bin/mount
+#linux_lvm_cmd_umount	/usr/bin/umount
+
+#########################################
+#     BACKUP LEVELS / INTERVALS         #
+# Must be unique and in ascending order #
+# e.g. alpha, beta, gamma, etc.         #
+#########################################
+
+retain	alpha	6
+retain	beta	7
+retain	gamma	4
+#retain	delta	3
+
+############################################
+#              GLOBAL OPTIONS              #
+# All are optional, with sensible defaults #
+############################################
+
+# Verbose level, 1 through 5.
+# 1     Quiet           Print fatal errors only
+# 2     Default         Print errors and warnings only
+# 3     Verbose         Show equivalent shell commands being executed
+# 4     Extra Verbose   Show extra verbose information
+# 5     Debug mode      Everything
+#
+verbose		2
+
+# Same as "verbose" above, but controls the amount of data sent to the
+# logfile, if one is being used. The default is 3.
+#
+loglevel	3
+
+# If you enable this, data will be written to the file you specify. The
+# amount of data written is controlled by the "loglevel" parameter.
+#
+#logfile	/var/log/rsnapshot
+
+# If enabled, rsnapshot will write a lockfile to prevent two instances
+# from running simultaneously (and messing up the snapshot_root).
+# If you enable this, make sure the lockfile directory is not world
+# writable. Otherwise anyone can prevent the program from running.
+#
+lockfile	/var/run/rsnapshot.pid
+
+# By default, rsnapshot check lockfile, check if PID is running
+# and if not, consider lockfile as stale, then start
+# Enabling this stop rsnapshot if PID in lockfile is not running
+#
+#stop_on_stale_lockfile		0
+
+# Default rsync args. All rsync commands have at least these options set.
+#
+#rsync_short_args	-a
+#rsync_long_args	--delete --numeric-ids --relative --delete-excluded
+
+# ssh has no args passed by default, but you can specify some here.
+#
+#ssh_args	-p 22
+
+# Default arguments for the "du" program (for disk space reporting).
+# The GNU version of "du" is preferred. See the man page for more details.
+# If your version of "du" doesn't support the -h flag, try -k flag instead.
+#
+#du_args	-csh
+
+# If this is enabled, rsync won't span filesystem partitions within a
+# backup point. This essentially passes the -x option to rsync.
+# The default is 0 (off).
+#
+#one_fs		0
+
+# The include and exclude parameters, if enabled, simply get passed directly
+# to rsync. If you have multiple include/exclude patterns, put each one on a
+# separate line. Please look up the --include and --exclude options in the
+# rsync man page for more details on how to specify file name patterns.
+#
+#include	???
+#include	???
+#exclude	???
+#exclude	???
+
+# The include_file and exclude_file parameters, if enabled, simply get
+# passed directly to rsync. Please look up the --include-from and
+# --exclude-from options in the rsync man page for more details.
+#
+#include_file	/path/to/include/file
+#exclude_file	/path/to/exclude/file
+
+# If your version of rsync supports --link-dest, consider enabling this.
+# This is the best way to support special files (FIFOs, etc) cross-platform.
+# The default is 0 (off).
+#
+#link_dest	0
+
+# When sync_first is enabled, it changes the default behaviour of rsnapshot.
+# Normally, when rsnapshot is called with its lowest interval
+# (i.e.: "rsnapshot alpha"), it will sync files AND rotate the lowest
+# intervals. With sync_first enabled, "rsnapshot sync" handles the file sync,
+# and all interval calls simply rotate files. See the man page for more
+# details. The default is 0 (off).
+#
+#sync_first	0
+
+# If enabled, rsnapshot will move the oldest directory for each interval
+# to [interval_name].delete, then it will remove the lockfile and delete
+# that directory just before it exits. The default is 0 (off).
+#
+#use_lazy_deletes	0
+
+# Number of rsync re-tries. If you experience any network problems or
+# network card issues that tend to cause ssh to fail with errors like
+# "Corrupted MAC on input", for example, set this to a non-zero value
+# to have the rsync operation re-tried.
+#
+#rsync_numtries 0
+
+# LVM parameters. Used to backup with creating lvm snapshot before backup
+# and removing it after. This should ensure consistency of data in some special
+# cases
+#
+# LVM snapshot(s) size (lvcreate --size option).
+#
+#linux_lvm_snapshotsize	100M
+
+# Name to be used when creating the LVM logical volume snapshot(s).
+#
+#linux_lvm_snapshotname	rsnapshot
+
+# Path to the LVM Volume Groups.
+#
+#linux_lvm_vgpath	/dev
+
+# Mount point to use to temporarily mount the snapshot(s).
+#
+#linux_lvm_mountpath	/path/to/mount/lvm/snapshot/during/backup
+
+###############################
+### BACKUP POINTS / SCRIPTS ###
+###############################
+
+# LOCALHOST
+backup	/home/		localhost/
+backup	/etc/		localhost/
+backup	/usr/local/	localhost/
+#backup	/var/log/rsnapshot		localhost/
+#backup	/etc/passwd	localhost/
+#backup	/home/foo/My Documents/		localhost/
+#backup	/foo/bar/	localhost/	one_fs=1,rsync_short_args=-urltvpog
+#backup_script	/usr/local/bin/backup_pgsql.sh	localhost/postgres/
+# You must set linux_lvm_* parameters below before using lvm snapshots
+#backup	lvm://vg0/xen-home/	lvm-vg0/xen-home/
+
+# EXAMPLE.COM
+#backup_exec	/bin/date "+ backup of example.com started at %c"
+#backup	root@example.com:/home/	example.com/	+rsync_long_args=--bwlimit=16,exclude=core
+#backup	root@example.com:/etc/	example.com/	exclude=mtab,exclude=core
+#backup_exec	ssh root@example.com "mysqldump -A > /var/db/dump/mysql.sql"
+#backup	root@example.com:/var/db/dump/	example.com/
+#backup_exec	/bin/date "+ backup of example.com ended at %c"
+
+# CVS.SOURCEFORGE.NET
+#backup_script	/usr/local/bin/backup_rsnapshot_cvsroot.sh	rsnapshot.cvs.sourceforge.net/
+
+# RSYNC.SAMBA.ORG
+#backup	rsync://rsync.samba.org/rsyncftp/	rsync.samba.org/rsyncftp/

backups/systemd_config/rsnapshot-daily.timer

@@ -0,0 +1,12 @@
+# Source link location: /etc/systemd/system/rsnapshot-daily.timer
+[Unit]
+Description=rsnapshot daily backup
+
+[Timer]
+# Run every day at 5:30AM local time
+OnCalendar=05:30
+Persistent=true
+Unit=rsnapshot@daily.service
+
+[Install]
+WantedBy=timers.target

backups/systemd_config/rsnapshot-hourly.timer

@@ -0,0 +1,12 @@
+# Source link location: /etc/systemd/system/rsnapshot-hourly.timer
+[Unit]
+Description=rsnapshot hourly backup
+
+[Timer]
+# Run every hour at 15mins past the hour
+OnCalendar=*:15
+Persistent=true
+Unit=rsnapshot@hourly.service
+
+[Install]
+WantedBy=timers.target

backups/systemd_config/rsnapshot-monthly.timer

@@ -0,0 +1,12 @@
+# Source link location: /etc/systemd/system/rsnapshot-monthly.timer
+[Unit]
+Description=rsnapshot monthly backup
+
+[Timer]
+# Run once per month at 3:30 local time
+OnCalendar=*-*-1 03:30:00
+Persistent=true
+Unit=rsnapshot@monthly.service
+
+[Install]
+WantedBy=timers.target

backups/systemd_config/rsnapshot-weekly.timer

@@ -0,0 +1,12 @@
+# Source link location: /etc/systemd/system/rsnapshot-weekly.timer
+[Unit]
+Description=rsnapshot weekly backup
+
+[Timer]
+# Run once per week on Monday at 4:30 local time
+OnCalendar=*-*-* 04:30:00
+Persistent=true
+Unit=rsnapshot@weekly.service
+
+[Install]
+WantedBy=timers.target

backups/systemd_config/rsnapshot@.service

@@ -0,0 +1,9 @@
+# Source link location: /etc/systemd/system/rsnapshot@.service
+[Unit]
+Description=rsnapshot (%I) backup
+
+[Service]
+Type=oneshot
+Nice=19
+IOSchedulingClass=idle
+ExecStart=/usr/bin/rsnapshot %I

nvim/init.vim

@@ -1,6 +1,3 @@
-" --- Standard Vim settings ---"
-
-"set number 
 set showmatch 
 set ignorecase 
 set hlsearch 
@@ -18,9 +15,11 @@ set mouse=a
 set clipboard=unnamedplus
 " set cursorline 
 set ttyfast
-set hidden
+"set hidden
 set background=dark
-
+set number
+set t_Co=256
+set laststatus=2
 "--- Plugins --- "
 
 call plug#begin()
@@ -30,7 +29,25 @@ Plug 'jiangmiao/auto-pairs'
 Plug 'ap/vim-css-color'
 Plug 'plasticboy/vim-markdown'
 Plug 'psliwka/vim-smoothie'
+
+Plug 'nvim-telescope/telescope-fzf-native.nvim', { 'do': 'cmake -S. -Bbuild -DCMAKE_BUILD_TYPE=Release && cmake --build build --config Release && cmake --install build --prefix build' }
+Plug 'nvim-lua/plenary.nvim'
+Plug 'nvim-telescope/telescope.nvim', { 'tag': '0.1.0' }
+Plug 'NLKNguyen/papercolor-theme'
 call plug#end() 
 
 syntax on
+
+"--- Mappings --- "
+
+let mapleader = ";"
+
+" Telescope
+nnoremap <leader>ff <cmd>Telescope find_files<cr>
+nnoremap <leader>fg <cmd>Telescope live_grep<cr>
+nnoremap <leader>fb <cmd>Telescope buffers<cr>
+nnoremap <leader>fh <cmd>Telescope help_tags<cr>
+
 "colorscheme greenisgood
+
+    

vscode/settings.json

@@ -1,5 +1,5 @@
 {
-  "editor.fontFamily": "Jetbrains Mono",
+  "editor.fontFamily": "Jetbrains Mono Light",
   "editor.fontLigatures": true,
   "editor.fontSize": 14,
   "editor.fontWeight": 400,
@@ -11,7 +11,7 @@
   "editor.bracketPairColorization.enabled": true,
   "terminal.integrated.fontFamily": "Jetbrains Mono",
   "terminal.integrated.fontSize": 13,
-  "terminal.integrated.fontWeight": "400",
+  "terminal.integrated.fontWeight": "300",
   "terminal.integrated.tabs.enabled": true,
   "debug.console.fontFamily": "Jetbrains Mono",
   "debug.console.fontSize": 12,
@@ -26,9 +26,9 @@
     "background": "#112616",
     "foreground": "#bde000"
   },
+  "markdown-preview-enhanced.previewTheme": "atom-light.css",
   "diffEditor.codeLens": true,
   "git.mergeEditor": false,
-  "workbench.iconTheme": "material-icon-theme",
   "npm.enableRunFromFolder": true,
   "security.workspace.trust.untrustedFiles": "open",
   "files.trimFinalNewlines": true,
@@ -37,7 +37,7 @@
   "vim.useSystemClipboard": true,
   "vim.highlightedyank.enable": true,
   "vim.highlightedyank.color": "#18e00040",
-  "meridian.ignoreDirs": ["img"],
+  "meridian.ignoreDirs": ["_img", "_scripts", "_meta", "posts"],
   "markdown-preview-github-styles.colorTheme": "light",
   "markdown.experimental.editor.pasteLinks.enabled": true,
   "markdown.experimental.updateLinksOnFileMove.enabled": "prompt",
@@ -53,7 +53,7 @@
       {
         "scope": "comment",
         "settings": {
-          "fontStyle": ""
+          "fontStyle": "italic"
         }
       },
       {
@@ -84,9 +84,7 @@
   "gitlens.advanced.messages": {
     "suppressGitMissingWarning": true
   },
-  "[shellscript]": {
-    "editor.defaultFormatter": "shakram02.bash-beautify"
-  },
+
   "window.titleBarStyle": "custom",
   "npm.keybindingsChangedWarningShown": true,
   "debug.onTaskErrors": "debugAnyway",
@@ -101,5 +99,14 @@
   },
   "editor.stickyScroll.enabled": true,
   "gitlens.views.branches.branches.layout": "list",
-  "workbench.colorTheme": "Alien Blood "
+  "files.insertFinalNewline": true,
+  "cSpell.userWords": ["colour", "colours"],
+  "workbench.iconTheme": "bearded-icons",
+  "workbench.colorTheme": "Alien Blood ",
+  "[shellscript]": {
+    "editor.defaultFormatter": "shakram02.bash-beautify"
+  },
+  "[css]": {
+    "editor.defaultFormatter": "esbenp.prettier-vscode"
+  }
 }

zsh/zshrc

@@ -1,10 +1,3 @@
-# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block; everything else may go below.
-if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-fi
-
 export ZSH="/home/thomas/.oh-my-zsh"
 
 alias vim="nvim"
@@ -12,6 +5,7 @@ alias cat="bat"
 alias grep="rg" 
 alias chrome="google-chrome-stable"
 alias spot="ncspot"
+alias xhd="cd /run/media/thomas"
 # Set properties based on OS
 
 case "$OSTYPE" in
@@ -32,7 +26,7 @@ case "$OSTYPE" in
 	linux*)
 		# Linux specific 
 		#ZSH_THEME=agnoster-customized
-		ZSH_THEME=robbyrussell
+		ZSH_THEME=spaceship
 		SPACESHIP_PACKAGE_SHOW=true
 		SPACESHIP_TIME_SHOW=true
 		SPACESHIP_NODE_SHOW=true